The automatic blow molding machine often catches the feeding tray when feeding: 1. This situation is very headache. In experience, once the length of the preform (embryo) is relatively long and the weight is large, then this The phenomenon is relatively small. 2, increase the material level but will not feed: This needs to achieve several conditions:
There is still no material in the hopper, if not: need to add materials as soon as possible;
However, if it is not: it is necessary to check whether the control contactor of the hoist has no power. Once it is powered, check if the motor is energized and loaded. The reason is that there is a big reason for this condition to be that the preform (embryo) is stuck to the lifting belt. The easiest way to do this is to help manually. Upgrade
When verifying that the control contactor of the hoist is not initially powered, check that the electric eye of the preform is not in the same line as the reflector. 3, the bottle often pinched the robot where there is no misplacement. 4. After the bottle is blown, it cannot be taken out inside the mold.