The overall equipment construction method of the machine is concise and exquisitely conceived, saving space and transportation costs. The three-piece module constitutes a structure, making full use of engineering simulation analysis to make one-boiling, two-hole, 5L blowing machine and jar of one-time blow molding.
1. Feeding the old card feeding tray: This situation is a question of contrasting headaches. From the experience, if the length of the preform (embryo) is larger than the long-cut component, then this phenomenon is less contrast.
2, the feeding position is not added: need to check several conditions: 1), is not the hopper has no material, if it is: demand for fast feeding; 2) If not: please check the control device is not in the control Electrical condition. If it is powered, check if the motor is powered and loaded as soon as possible, because this condition is likely to be caused by the preform (embryo) stuck in the lifting belt, the simplest way is to manually improve; 3) If the control contactor of the booster is not in a power-on condition, check the preform to see if the electric eye is not on the same line as the reflector.
3, the bottle is always pinching the position of the robot is not misplaced.
4. The bottle cannot be removed from the mold after it has been blown.
First of all, the mold should be turned over, and the mold should be opened and closed manually. If it is normal, run it in the air running condition, if it is normal.
Please check your exhaust time setting. If the exhaust setting is normal and you only need one blown bottle at a time, then you can judge the exhaust valve. Please open the exhaust valve to check its spring and seal. Condition (There is also a phenomenon in which the exhaust sound is loud or has a bad sound).
If you are experiencing a lot of mold production and occasionally come to this unopened condition, please check if the lock pin has a segment of the screw inside, please check the clamping force is too big, if too Big should be adjusted from the beginning according to the standard.
5. Collision between two robots: This situation requires manual resetting of the robot from the head, which is caused by misalignment.
If you want to buy a blow molding machine, you can find us.
LONGRUI machinery integrating advanced technologies and concepts at home and abroad. Professional design, production and sale three kinds, more than 20 specifications automatic/semi-automatic blow molding machines. It is suitable for production all kinds of plastic bottle products with PET/PP/PE as raw material,volume from 5ml to 40l, such as spring water bottle, space cup, light cover and so on. With excellent quality, stable performance, superior cost performance , we are devoting ourselves to technical research in order to build up good reputation&famous brand. We have already established business relations with more than 60 countries in Asian, Middle East, Europe, Africa, America, Australia….