1.Adopt the new type double bend arm and four pull rod-clamping structure (won the patent): cross direction; middle mould board is move parallel; the distance between two moldboard is adjusted by the chain wheel. Thus, the clamping force is very strong.
2.The machine frame is produced by the whole complete casting bottom, so that the machine are firm and running stable
3.Adopt the straight slideway, reduce the friction and lengthen the life of the machine.
4 double start working button, which is designed for avoiding the injury.
5. Power saving design that can increase your profits
6.The single direction of pre-form placing and bottle picking, which increase the output.
7 Segregate type air controlling system, which is designed for avoiding waste pollution
8 The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.
|Max container volume||L||1(2-CAVITY)/2(1 CAVITY)|
|max neck diameter||MM||100|
|max container diameter||MM||115|
|Heat lamp amount||MM||42|
|Max heating power||kw||33.6|
|power of main blower||KW||34|
|actual power consumption||KW||15-18KW|
|measurement of main blower||MM||1650*610*1550|
|measurement of elevator||MM||4200*660*1380|
|weight of main blower||KG||1600|